Eclipse Security 4 Channel Premium DVR Manual do Utilizador Página 47

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 58
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 46
47 | P a g e
Ness IQ-SDI Users Manual
Click (
) Motion Event frame and select Motion Event 1.
Select cameras for recording when Motion Event 1 is on. Please check a check box under Link Camera. More than
two cameras can be set.
Select alarm outputs to be worked when Motion Event 1 is on. Please check a check box under Link Alarm Out. More
than two alarm outputs can be set.
Select E-mail addresses for notification when Motion Event 1 is on. Please check a check box under Link Notification.
More than two E-mail addresses can be set.
Repeat the above procedure for Motion Event 2~ Motion Event 16.
Click (
)By Duration box to set up the recording duration and prevent recording caused by event.
The duration time can be controlled by previous setting mode:
RECORD>Settings>Event
Choose ‘OK’ to confirm the setting.
4.6.3 Video Loss
Please click (
) LINK>Video Loss and the following screen will appear.
Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
Click (
) Video Loss frame and select Video Loss 1.
Select cameras for recording when Video Loss 1 is on. Please check a check box under Link Camera. More than two
cameras can be set.
Select alarm outputs to be worked when Video Loss 1 is on. Please check a check box under Link Alarm Out. More
than two alarm outputs can be set.
Select E-mail addresses for notification when Video Loss 1 is on. Please check a check box under Link Notification.
More than two E-mail addresses can be set.
Repeat the above procedure for Video Loss 2~ Video Loss 16.
Click No Beep to deactivate alert sounds from video loss. Apply to all channels.
Choose ‘OK’ to confirm the setting.
4.6.4 System Event
Please click (
) LINK>System Event and the following screen will appear.
Vista de página 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 57 58

Comentários a estes Manuais

Sem comentários